ROCKET SUP Pro

The Pro construction uses the very light and super strong carbon construction shared by all our PRO SUP boards. Carbon fibers are used throughout the board to achieve the required strength with minimum weight. The deck features a bamboo sandwich while the bottom is HD foam sandwich.

Key features:

  • Stable and super Maneuverable
  • Brings you closer to the Surf Foil Feeling
  • Lighter for an enhanced flight experience
Read more...

Program

90%
Take Off
90%
Stability
80%
Carving
80%
Pumping

Technical Specifications

Our experience of riding foils on Stand Up Paddle boards for the past few years has allowed us to design the best possible board to Stand Up Foil. Being able to control the take-off from a stand-up position really makes things easier and this is why Stand Up Foiling is fantastic. It’s not only an easier step at the beginning and it also lets you charge steeper waves as you progress.  The other key aspect is that on foil you’re flying far and coming back paddling on a Stand Up is a lot more comfortable than on a Surfboard.

The challenge when designing a Stand Up Foilboard is to keep all the volume you need to paddle, keep the stability and take off ability while taking away all volume you don’t need while flying. The ROCKET SUP is the result of all our experience in various waves and wind conditions from the Mediterranean waves to perfect reef break.

Short and narrow but still very stable thanks to the parallel outline, the ROCKET will let you take off from your usual Stand Up Paddle position and be super maneuverable on the waves. Coming down under the 7’0’’ length is a fantastic step when foiling and brings you closer to the Surf Foil feeling.

To choose you size in this new discipline is easy, just look at the volume of your actual board and not the size. Go for a ROCKET SUP that’s equal volume or slightly higher than what you use normally. The foil mast adds a lot of stability so you can use a board which is narrower than usual.

  • Smart handle

    Featured on the whole F-ONE SUP range:
    the innovative and multifunction handle developed by F-ONE.

    The SMART HANDLE includes the following features :

    1 – Decompression valve
    2 – Multifunction tool compartment
    3 – Recessed volume
    4 – Screwdriver head
    – Allen key

    More comfortable with advanced ergonomics, it is completely recessed and makes it easier to carry the SUP. The new handle helps a lot to grab the boards easily when lying flat on the ground or on the water.

    A groove has been added onto the thread of the valve so that you only have to unscrew by a few turns to let the air out. No need to unscrew it completely and therefore no risk to lose it.

    The handle already includes the screw for the decompression valve (1).
    A specific multifunction tool has been created and fits neatly into the handle (2).

    The top part of the tool was designed to serve as a screwdriver to open or close the decompression valve.

    To prevent from oversight and to make sure the decompression valve is always closed when the SUP is in the water, a reminder has been included: you cannot fit the tool back into its place nor can you carry the board if you haven’t closed the decompression valve. Furthermore, the tool finds itself clipped on in this position. This was made to ensure the board can be transported without losing the tool. You therefore don’t have to look for the last place where you left the tool and can be sure that anyone grabbing your board will notice that the valve is not shut.

  • ROCKET SUP Equipment new

    FULL PAD

SIZE DIMENSIONS VOLUME  WEIGHT DECK INSERTS FIN BOXES
6’0 6’0 24.5″ 183 x 62.5 cm 80 L 5 kg* GoPro + US track + Leash Plug Single US
6’6 6’6 x 25.5″ 198 x 65 cm 92 L 5’7 kg* GoPro + US track + Leash Plug Single US
7’0 7’0 x 26.5″ 213 x 67.5 cm 105 L 6’4 kg* GoPro + US track + Leash Plug Single US
7’6 7’6 x 27.5″ 229 x 70 cm 120 L 7’1 kg* GoPro + US track + Leash Plug Single US
*indicative value, subject to small variations due to the custom manufacturing process.
  • SUP 2019